Всё сделал по инструкции
вот консоль
cds ~ # cd /var/calculate/linux
cds linux # ls
cld-20160930-x86_64.iso
cds linux # cl-install-pxe --iso /var/calculate/linux/cld-20160930-x86_64.iso
Установка PXE
* Установочный образ: Calculate Linux Desktop KDE 15.17 x86_64 20160930
* Путь для установки: /var/calculate/pxe
* IP адрес PXE сервера: 192.168.0.77
Запустить процесс? (Yes/No): yes
* Распаковка образа системы ... [ ok ]
* Настройка PXE установки ...
* * Stopping tftpd ... [ ok ]
* * Starting tftpd ... [ ok ]
* * Stopping NFS mountd ... [ ok ]
* * Stopping NFS daemon ... [ ok ]
* * Unexporting NFS directories ... [ ok ]
* * Exporting NFS directories ... [ ok ]
* * Starting NFS mountd ... [ ok ]
* * Starting NFS daemon ... [ ok ]
* * Starting NFS smnotify ... [ ok ]
* * Stopping dhcpd ... [ ok ]
* * Starting dhcpd ... [ ok ]
* in.tftpd | * /etc/init.d/in.tftpd uses runscript, please convert to openrc-run.
* nfs | * /etc/init.d/nfs uses runscript, please convert to openrc-run.
* dhcpd | * /etc/init.d/dhcpd uses runscript, please convert to openrc-run.
*
* Отключение устанавливаемого дистрибутива ... [ ok ]
* Система установлена!
cds linux #
Что то мне не нравятся строчки
* in.tftpd | * /etc/init.d/in.tftpd uses runscript, please convert to openrc-run.
* nfs | * /etc/init.d/nfs uses runscript, please convert to openrc-run.
* dhcpd | * /etc/init.d/dhcpd uses runscript, please convert to openrc-run.
При попытке зайти на машине после того как получен ip пишет
Fileneme: pxelinux.0
Could not start download: Operation not supported (http://ipxe.org/3c092003)
No more network devices
FATAL: Could not read from the boot medium! System halted.